Get your teeth into a Randox commutable control this Halloween
Get your teeth into a Randox commutable control this Halloween
It is that time of year again – when people dress up, children trick-or-treat and many a scary story is told in households around the world. An age-old tradition celebrated globally by millions of people – it can only be Halloween.
Last year Randox QC brought you the truly scary story about a laboratory who chose not to use a third party control, but eventually “treated their laboratory to a true third party control”. This year, we have another scary story for you about a lab manager in Transylvania, Dr. Acula.
It was a normal, busy day in the lab for Dr. Acula. That was until it was time to change reagent batch, after changing batch of reagent Dr. Acula was shocked to find his QC results had shifted by over 20%. This left Dr. Acula very frustrated, having to spend precious time troubleshooting and reassigning QC targets. After troubleshooting showed no apparent root cause, Dr. Acula searched the internet for an answer finally stumbling upon an educational guide from Randox Quality Control on commutability and its many benefits to the lab.
Grinning from ear-to-ear with excitement, Dr. Acula began to read the guide in the hope of finding a solution to his problem – and solutions he found. While reading the guide, Dr. Acula came across a quote from ISO 15189:2012. It read that laboratories “must use quality control materials that react to the examining system in a manner as close as possible to the patient sample”.
Dr. Acula made a decision to look for a commutable control material that met all of his requirements and he didn’t have to search very far. Randox Quality Control were able to supply Dr. Acula and his laboratory with a QC material to meet all his needs – true third party, excellent stability, consistency and consolidation but most importantly of all commutable controls. The fact all Randox immunoassay and immunology controls are manufactured from 100% human material appealed to Dr. Acula a lot. After trialing the Randox control material alongside patient samples and comparing results between reagent batches, Dr. Acula was thrilled with the results.
Labs rely heavily on quality control to detect errors in their test system and to ultimately make critical decisions regarding the accuracy and reliability of patient test results, the use of a control that reacts to the test system in the same manner as a patient sample is therefore essential.
At Randox Quality Control we take quality seriously. All our QC products are manufactured to the highest possible standard ensuring controls of unrivalled quality time and time again. Designed to be commutable, the Acusera range will ensure accurate and reliable instrument performance while simultaneously helping laboratories meet ISO 15189:2012 requirements.
Just ask Dr. Acula, who likes our 100% human controls so much he has started to drink them himself!
T’was the week before Christmas and all through the lab not a thing could be heard not even a sound. The analyser lay silent asleep in the corner, the lab staff at home dreaming of a few days’ rest, only a few more days to go before the big day!
The big man in red, what will he bring those who already have everything? Peace, happiness and health for their loved ones throughout the festive break, that would be the wish for everyone to make. And what better way to ensure they stay healthy, well it all begins in the laboratory…
An important consideration to remember when choosing your lab Quality Control (QC) is that approximately 70% of clinical decisions are based on laboratory test results. It is therefore essential that the results gained from laboratory testing are accurate and reliable in order to provide the appropriate treatment and avoid or prevent potential misdiagnosis.
Patient results are of the utmost importance for a laboratory and therefore running the best Quality Control material should be at the top of their agenda. QC material should have a number of features that allow a lab to judge the overall quality of their output. These features include the controls ability to be commutable (which means how well it reacts as a replicate of a patient sample), is it a true third party control that has been manufactured to provide an independent and unbiased assessment of performance, does your control come with clinically relevant levels and does it have a long shelf life as well as a good open vial or reconstituted stability? These are the questions lab staff will be asking themselves when deciding on what QC is the right QC.
So stay off Santa’s naughty list by providing accurate and reliable patient test results, do this by employing Randox QC in your laboratory. Our controls have been designed to deliver significant cost savings without sacrificing on quality. With consolidated controls (combining up to 100 analytes in a single vial) your lab can reduce QC costs and preparation time, the inclusion of analytes present at clinical decision levels will eradicate the need for additional controls and because of our long shelf life (2 years for liquid controls, 4 years for lyophilised) and excellent stability claims your laboratory can be sure that expensive lot changes will be a thing of the past! Our controls can be described as true third party and this, combined with the commutable nature of the controls, leads to us being able to claim that we have the best Quality Control material around.
So this Christmas when deciding what QC to choose – make sure you look no further than Randox Quality Control. Our QC family is known as Acusera and our product offering includes QC and calibrator material, Interlaboratory Data Management Program (Acusera 24.7), the world’s largest international EQA/PT scheme better known as RIQAS and the newest addition to the family, Linearity or Calibration Verification material.
We have packages for every lab regardless of size and budget and we guarantee you will become ho-ho-hooked on Randox QC.
Wishing you all season’s greetings and a prosperous New Year from everyone at Randox QC.
Don’t Get Tricked This Halloween – Treat Your Lab to Randox True Third Party Controls Today!
Halloween – a celebration observed by many countries around the world on a yearly basis. Falling on October 31st this holiday is a chance for people to dress up, carve pumpkins, bob for apples, attend costume parties, trick-or-treat and tell scary stories.
It just so happens that we have a scary story for you – and what makes this story even scarier is that it’s a true story!
Our story starts off in a medical laboratory. This laboratory was running QC on their machine as they would do every day. Getting accurate results with no faults or problems arising from their machine, this laboratory was happy with how things were going – until one day when it all went wrong!
Having run their EQA/PT samples, the laboratory found themselves reviewing their report with shock –they noticed a large negative bias. To their horror the perceived ‘accuracy’ they had once achieved was now no longer the case. Right away the laboratory professional’s thoughts turned to the fact that approx. 70% of all clinical decisions are based on laboratory test results, meaning it is essential that the results provided are accurate and reliable in order to prevent potential misdiagnosis or inappropriate treatment. Had they sent incorrect patient results to the clinicians? Had a patient been misdiagnosed? Many thoughts fluttered around in their heads.
The laboratory repeated their QC and found that the results obtained were almost identical to the previous run. The laboratory knew there must be a problem with their QC or their instrument, so they began the troubleshooting process. Nothing. Nada. Zilch. “What was going on?” was the question on the lips of the laboratory professionals.
One of the laboratory professionals then stumbled across a case study that took place in the University of Verona and Academic Hospital of Parma, Italy. The study was related to a field recall of Intact PTH, the reagent was recalled after falsely elevated patient results were discovered. The alarming thing was that the same elevated performance was not identified by the instrument manufacturer’s control. The study reported that due to this issue there was potential for 40,000 inaccurate patient results from just 18 labs in the Lombardy region of Italy. The study also concluded that the issue could have been prevented if a third-party control, independent from calibrator materials had been used.
This PTH case study got the laboratory thinking that maybe they should source a true third party manufacturer… Having sampled a third party QC, the lab found their results now mirrored that of their EQA and patient samples and as such proceeded to make the switch from first party to third party.
The moral of this story is that first party controls can sometimes “trick” the lab into thinking their performance is acceptable. Quite often target values provided with first party quality controls are in the middle of the analytical range thus masking the issues at the low and high ends of the assay range. Laboratory professionals should “treat” their labs to the best QC material. ISO 15189 highlights that the “use of independent third party control materials should be considered, either instead of, or in addition to, any control materials supplied by the reagent or instrument manufacturer”. So this Halloween don’t randomly choose your QC supplier, treat your laboratory to the best, Randox QC.
All Randox controls are manufactured independently of any instrument or reagent, and designed for use with multiple instruments and methods ensuring, unbiased performance assessment.
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- July 2014
- June 2014